Shandong Zhongtian Rubber & Plastic Technology Co., LtdE-mail: sales@ztrotomachinery.com
banner
Home » News » Content
Product Categories

Maintenance Of Rubber Hose After Installation

- Jan 02, 2018 -

1. Proper use of rubber hose

It is important to determine the length of the rubber tubing you need, and also to check whether the use of rubber tubing meets the requirements of the selected hose. You should ensure that the rubber hose you will use is the most appropriate. Work pressure and suction value should be carefully determined. In particular, it should be noted that sudden pressure changes or peak pressure exceeding the maximum allowable value will greatly shorten the life of the rubber tube. The ends of the rubber hose are not continuously immersed in the conveying material.

2. Install rubber Hose for use

If you install the rubber hose when the bending radius is less than the specified minimum value, the life of the rubber hose would be greatly shortened. Therefore, before installing, it is recommended that you use information to consult, especially rubber tube bending radius information.

3. Rubber Hose Maintenance

Cleaning: After use, we recommend that you empty the hose. If necessary, clean. Check: Rubber tubing must be checked after each use to ensure that no structural damage occurs. Pressure: If the rubber tube is under severe pressure or the outer layer of the rubber pipe will contact with the liquid transported for a long time, the hydraulic test is recommended.